Scope of application:It is used for uniform extrusion in the laboratory to remove excess water from the fabric and completely simulate the on-site process of pad dyeing.

Technical indicators:          

1. The pressure suction roller adopts imported materials and is covered externally.N,B,R, rubber and then to be precision grinding completed, hardness

For Shaw72 degrees;

2. The diameter of the rubber roller is 130mm and the length is 430mm;

3. Motor: three-phase motor rotation, adjustable speed;

4. Pressure range: 0~7kg; left and right pressure independent adjustment,

5. Speed: 0~10 m/min frequency conversion speed regulation;

6. Power supply: AC380V 50HZ;

7. Power: 150W;

8. Overall dimensions: vertical 920 × 620 × 1240mm; Horizontal 920 × 620 × 1080mm;

9. Net weight: 105kg.

Instrument features:   

1. Push the cylinder with compressed air. The pressure is equalized, and the pressure reproducibility is good after prolonged use.

2. Roller use hardness72 degrees, the pressure suction rate is between 45% and 90%, and the scope of application is wide.

3. The safety performance of small rolling cars is better than that of the same industry. The motor rotation is equipped with forward and reverse rotation function, and the rotation control can be manual

Or foot movement to exchange control, the operator is absolutely safe. The special device is highly efficient and safe without pinching fingers.

4. Adopt high quality304Stainless SteelMaterial manufacturing, beautiful appearance, durable.